Usb Devices And Memory Cards; Remote Control; Protective Circuits - Omnitronic MAVZ Serie Bedienungsanleitung

USB devices and memory cards

Insert a USB device into the USB port. Slide memory cards into the card slot with the contacts facing right.
The display indicates the source selected. After loading a data carrier, it is selected as the playback medium
and the playback will start automatically.
To select folders on the player, first press the "FOLDER" button to activate folder selection mode. Then use
the "PREV" and "NEXT" buttons to browse the folders. Press "PLAY/PAUSE" to confirm a selection
(highlighted) and start playback.

Remote control

Protective circuits

The protective circuits prevent damage to the speakers and the amplifier. If activated, the speakers are
electrically separated from the amplifier and the LED "Fault" lights up:
• for a few seconds after switching-on until the speaker outputs are ready for operation
• in case of overheating of the amplifier
• in case of a short-circuit at a speaker output
• in case of a DC voltage at a speaker output
If the red LED "Fault" lights up during operation or if it does not extinguish after switching on, the amplifier
has to be switched off and the cause of the fault has to be removed.
Button Function
Player on/off
MODE Switches between USB/SD/Bluetooth
Mute on/off
Play/pause
►
Short actuation: previous/next title
/
Long actuation: fast rewind/forward
EQ Equalizer settings
VOL- / VOL+
Volume down/up
0-9 Direct title selection
SCN/RPT Random play and repeat functions
Before first operation, pull out the insulating foil on the back. To
change the battery, press the small latch with the notch to the
right and pull out the battery holder. Insert a button cell type
CR2025 into the holder with the positive pole facing upwards.
Remove the battery when not in use for a longer period of time.
24 • EN