Connection Cable - Electrolux DMSL8350UO Benutzerinformation

INTEGRATED INSTALLATION
15,5
10 ENGLISH
8
28
521 836
Find the video tutorial "How to install your
Electrolux Extractor Hob" by typing out the full
name indicated in the graphic below.
How to install your Electrolux
Extractor Hob
Filter housing assembly
Before first use make sure to insert the filter
inside the housing, with the black sides facing
inwards and the silver sides facing out. Refer
to "Cleaning the hood filter". Once the filter
housing is assembled, put it inside the hood
cavity and place the grid on the hood.

3.6 Connection cable

• The hob is supplied with a connection
cable.
• To replace the damaged mains cable, use
the cable type: H05V2V2-F which
withstands a temperature of 90 °C or
higher. Contact an Authorised Service
Centre. The connection cable may only be
replaced by a qualified electrician.
www.youtube.com/electrolux
www.youtube.com/aeg