Replacing Nylon Line - Stihl FSE 31 Gebrauchsanleitung

English

Replacing Nylon Line

Preparations
Switch off the trimmer.
N
Disconnect the plug from the wall
N
outlet.
Turn the trimmer on its back.
N
Removing Remaining Nylon Line
In normal operation, the supply of nylon
line in the head is used up completely.
Removing the Spool
4
3
2
1
5
Hold the housing (1) steady.
N
Press in the tabs (2) and remove the
N
cover (3).
Pull the spool (4) out of the housing.
N
32
Installing a New Spool
5
Use nylon line with a diameter
N
of 1.4 mm.
2 Thread the ends of the lines through
N
the openings (5) in the housing (1).
Place the spool (4) in the housing.
N
Press home the cover (3) until both
N
tabs (2) engage with a audible click
3
2
4
5
1
FSE 31, FSE 41