Spray Arms; Control Panel And Appliance; Door - Pkm GSP12A++7TI Bedienungsanleitung

1. Turn the filter in anticlockwise direction.
2. Take out the filter unit.
3. When operating from step 1 to 2, you remove the filter system, when operating
from step 2 to 1, you install the filter system.
 We recommend to clean the entire filter system once a week.
 Remove bigger remnants after each programme.
 Clean the coarse and micro filter with a washing-up brush.
 Do not knock against the filters as you will damage them. Your appliance will
not work properly if the filters are damaged.
 Always install the filters properly.
 Improperly installed filters may damage the appliance and dishes.

7.2 Spray arms

1: open.

7.3 Control panel and appliance

 Clean the control panel with a soft damp cloth and dry it carefully.
 Clean the exterior of the appliance with a suitable polish.
 Never use sharp-edged items, scouring pads, scouring agents, paper
towels or other abrasive and aggressive detergents to clean any
component of the appliance.

7.4 Door

 Clean the sides of the door with a warm damp cloth.
 Clean the exterior surface with a suitable polish.
 Clean the spray arms regularly as
chemicals and minerals may clog the
nozzles and bearings.
 To remove the upper spray arm unscrew
the nut (clockwise) and remove the spray
arm. To remove the lower spray arm, lift
it upwards.
 Clean the spray arm with warm soapy
water and the nozzles with a soft brush.
 Rinse the spray arm with flowing water
and reinstall it.
72