Pkm GSP12A++7TI Bedienungsanleitung Seite 59

Status of the water
softener
Loading of the dish racks
Selecting of a programme
Starting of a programme
End of a programme
Close the tap,
unload the racks
Before you start operating the appliance, check that
1. the appliance is positioned and levelled properly.
2. the inlet valve is opened.
3. the connections of the hoses do not leak.
4. the appliance is plugged in properly.
5. the power is switched on.
6. the hoses are not knotted.
7. you have removed the complete packaging material..
Electric indicator of the control
panel. If the appliance is not
equipped with
indicator, please estimate the
point in time to refill relevant to
the number of wash cycles.
Remove larger qauntities of food remnants. Please
soak burnt-in food remnants; then load the racks.
Press the Programme button until the selected
programme is indicated on the display.
Close the door and open the tap. Then press the
S /P button. The programme will start after
TART AUSE
approx. 10 seconds.
When a programme has ended, an acoustic signal
sounds eight times The programme has ended.
Switch off the appliance using the
button.
WARNING! Open the door carefully. Hot water
vapour can escape when the door has been
opened!
Close the tap. Wait approx. 15 minutes, before you
unload the racks. Unload the lower rack first.
59
an electric
/
ON OFF