KLIM Ai-1 Airbag Vest Benutzerhandbuch Seite 9

In&motion (ref: IMI 2368) are certified and designed for use in the
In&motion airbag system. Do not use any other inflators for any
reason.
To obtain a new inflator, contact your local reseller.
2.Post-inflation procedure
After inflation, please follow the following 4 steps:
1) Check the integrity of the vest
2) Remove the empty inflator
3) Check the integrity of the In&motion airbag system
4) Install a new inflator
These steps are described below. In case of damage or anomaly,
do not use the vest and contact your local reseller.
You will also find this procedure on In&motion tutorial video
available on In&motion Youtube channel:
http://bit.ly/InemotionTuto as well as in the mobile app «My
In&box».
3. Check the integrity of your vest
Check the integrity of the fabric parts and plastic
parts. Check the integrity of the back protector.
Check the integrity of the connector. If you suspect
any deterioration in the vest (abrasion, holes, rips
in the fabrics parts or plastic parts, breakage or
whitening of the plastic parts, fabric bobbling,
rupture of the vest assembly threads), contact your
local reseller.
4. Remove the empty inflator
Warning!
The inflator must be handled carefully
2
1
Wash your hands before and after
replacing the inflator. Conduct the
following operations in a clean and dry
environment.
Remove the In&box from its housing.