KLIM Ai-1 Airbag Vest Benutzerhandbuch Seite 5

• Do not use the protective vest for other uses: improper handling
may seriously reduce the protection provided.
There is no product (neither PPE nor PPE combinations) that can
offer total protection against injuries or death.
WARNING: do not use YOUR GARMENT without its PROTECTORS
inserted!
IF YOU DO NOT UNDERSTAND OR APPRECIATE THE
DANGER OF THESE ACTIVITIES, PLEASE REFRAIN FROM ALL
MOTORSPORTS ACTIVITY AND FURTHER USE OF IN&MOTION
AIRBAG SYSTEM.
TEMPERATURE LIMITATIONS (G)
The system must be used exclusively at temperatures between
-10°C and 45°C (14°F and 113°F). Prolonged exposure of the
system to temperatures exceeding this range may compromise its
functionality.
CLEANING INSTRUCTIONS (H)
Do not wet the back protector or the back of your item. The inflator
connector, the inflator, the In&box must not encounter water.
Clean the exterior and interior of your item with soapy water using
a small soft brush and by gently scrubbing in a circular motion.
Then rinse with a soft wet sponge to remove the excess soap and
any dirt that you may have loosened in the previous step. Dry your
item first by using a soft cotton cloth; then leave to completely air
dry in a dry and ventilated area for a minimum of 12 hours.
• Do not bleach
• Do not iron
• Do not machine wash
• Do not dry clean
• Do not tumble dry
• Do not use a hair dryer
• Do not use detergent
• Dry away from sources of heat and away from sunlight
WARNING (I)
The airbag vest is designed to offer optimal protection only if the
airbag system is inflated.
STORAGE AND TRANSPORTATION (J)
Keep the vest and the In&box in a clean and ventilated area, away
from humidity and light, and away from impacts and pressure. Do