KLIM Ai-1 Airbag Vest Benutzerhandbuch Seite 13

In&Box Inserted In&Box Inserted In&Box Inserted
Correctly Incorrectly Incorrectly
4. WARNING
The vest textile is not abrasion resistant. Therefore, it is imperative
that your jacket or coat designed for use with two-wheeled motor
vehicles completely covers the vest.
Warning: excessive exposure to water will cause the airbag
product to function improperly. It is recommended for use only
under a waterproof protection garment designed for two-wheeled
motor vehicle users. Under no circumstances should the vest be
worn alone, without a protective coat or jacket over it because the
vest textile is not resistant to abrasion.
JACKET COMPATIBILITY (Q)
The In&motion airbag system is compatible with
a backpack. For that, it is important to respect the
following conditions:
• The total weight of the bag must not exceed 8kg,
• The use of support straps in the abdomen and
chest is prohibited,
• The shoulder straps must not hinder the
deployment of the airbag. When pulling the straps
forward, there should be a distance of 10 cm between them and
the front of the shoulder.
• The backpack must be worn on the back of the user's body,
compatible with a compatible motorcycle jacket.