KLIM Ai-1 Airbag Vest Benutzerhandbuch Seite 10

Open the zipper on the back to access the inflator.
Unclip the inflator from its housing.
To do this, pull the inflator to remove it from its housing.
Warning! To avoid damage, do not force the connector and do not
pull on the cable to remove the inflator.
Press the two tabs and then pull gently. If it's not easy, press on
one connector tab, then the other and so on.
Unscrew the used inflator only after removing the
connector.
Check that the seal is positioned correctly and is not
damaged.
5. Check the integrity of the In&motion airbag
system
Take your inflation adapter, which is provided with
your spare inflator. To purchase a new inflator, you
can go on www.inemotion.com or in shops.
Screw the provided inflation adapter in the
place of the inflator.
Thanks to this adapter and using a pump or a
compressor, inflate the vest to 0,3 bar (5 psi)
and check that it does not deflate in less than 5
seconds. (Any pneumatic inflation system, such
as those available in filling stations may be
suitable for this operation.).
While the vest is inflated, check the integrity
of the fabric parts and seams. Check that the
seams are not fraying. If the vest does not
inflate or deflates quickly, do not use the vest
and contact your local reseller. Otherwise,
remove the adapter by unscrewing it, then
completely remove the air contained in the
airbag system.
6
W
(b
h
W
s
c
S
P
C
C
C
fu
C
T
c
h