KLIM Ai-1 Airbag Vest Benutzerhandbuch Seite 14

The airbag product is not compatible child harness.
The airbag product is not compatible with jackets or coats having
a support in the crotch.
Never wear a neckbrace while wearing the airbag system. The
airbag system is not compatible with a neckbrace.
Do not zip your jacket to your trousers.
The vest is not compatible with full one-piece suit (for instance
textile/leather suit, rain suit) except "In&motion Airbag system
compatible" suits which have been tested and are compatible
with a proper inflation of the airbag, provided that the size of the
garment is appropriate to your body dimensions.
To select the proper size of your garment, please refer to the
sizing guide of the garment.
The use of the vest with non-compatible suit may cause the airbag
to function improperly and can cause injury.
USE RECOMMENDATION (R)
A) Measure around your chest in cm | in inches (e.g. 100 cm | 39
inches)
B) Measure around your waist, at navel height, in cm | in inches
(e.g. 90 cm | 35 inches)
C) Add these 2 measurements, then divide by 2
Warning! Excessive exposure to water
will cause the vest to function improperly.
It is recommended for use only under a
waterproof protection garment designed
for two-wheeled motor vehicle users.
The vest textile is not abrasion resistant.
Therefore, it is imperative that your jacket
or coat designed for use with two-wheeled
motor vehicles completely covers the vest.
To verify that your jacket on your body
is compatible with the airbag vest,
measurements must be taken. You can
check the compatibility of your jacket or
vest yourself by following the protocol
below:
1) Measurements of the user without vest
Take the following measurements without
wearing the vest: