KLIM Ai-1 Airbag Vest Benutzerhandbuch Seite 21

exclusively at temperatures between -10°C and 45°C (14°F and
113°F). Prolonged exposure of the system to temperatures
exceeding this range may compromise its functionality. Keep the
back protector in a clean area and away from humidity.
Transport the back protector in clean packaging protecting it from
humidity.
After an impact, the back protector may be partially damaged by
having absorbed the energy from the impact to reduce its force.
Systematically check your protection equipment before use to
confirm that it is in good useable condition and not damaged. If
you suspect any deterioration, contact your local reseller.
Do not, under any circumstances, modify your back protector nor
its components. Any modification of any kind may compromise its
functions and, consequently, its protection performances in case
of a fall or accident.
Do not repair or replace with any other parts or accessories which
is not an original In&motion item.
To clean the back protector, use a soft wet cotton cloth on the
foam or plastic part.
Warning, do not clean the inflator. The inflator connector and the
inflator must not encounter water.
- Do not bleach
- Do not iron - Do not machine wash
- Do not dry clean - Do not tumble dry
- Do not use a hair dryer - Do not use detergent
with the type of FB protector (full back
protector), the performance level (1); as well as
the information concerning the size (distance
between the waist and the shoulder)
EN1621-2:2014 : reference technical standard
Name and address of manufacturer
Product serial number
7 USE AND STORAGE INSTRUCTIONS
The back protector must be used and store