KLIM Ai-1 Airbag Vest Benutzerhandbuch Seite 3

FITTING THE VEST (D)
The vest must be worn and fitted correctly so that the protection
areas are placed on the thorax, abdomen and back. To obtain
optimum protection and comfort, please select the right size and
ensure that the vest is fitted correctly to your body. Close all the
closures and other straps for maximum comfort. If necessary, refer
to the following table to select the appropriate size for your body
shape:
AIRBAG VEST
WAIST-SHOULDER
LENGET
WARNING (E)
Any modification or improper use may negatively impact the
system performance. Do not, under any circumstances, modify
your airbag system, the In&box or its components in any way. Any
modification of any kind may compromise its functionality and
protection capabilities in a fall or accident. Never add decorations,
ribbons, self-adhesive patches, or other parts to the airbag
system. Never connect an electronic device or an external battery
to the system. The vest components must never be modified. This
product should only be serviced/repaired by KLIM to guarantee
the full functionality of this produt. Under no circumstances should
the vest be modified or disassembled.
WARNING (F)
n This personal protective equipment (PPE) is intended to protect
n against mechanical impacts. In certain cases, it helps reduce the
severity of the injuries to riders and passengers following a fall
to the ground, a collision with a vehicle or an impact against an
obstacle.
There is no product that can offer total protection against injuries,
death, bodily harm, or damage in case of a fall, accident, collision,
impact, loss of control or any other event. Only the parts of the
body covered by the protection may be protected against impact.
The In&motion airbag system can never be considered as a
substitute for protective equipment such as helmets, goggles,
S M L
37- 40- 42-
42CM 45CM 47CM
XL 2XL 3XL
42- 42- 42-
47CM 47CM 47CM
ENGLISH