Intended Use - KLIM Ai-1 Airbag Vest Benutzerhandbuch

BACK PROTECTOR USE INSTRUCTIONS
The IMP Moto back and the IMP back 1 protector was designed
especially for motorcyclists.

1 INTENDED USE

The IMP Moto back and the IMP back 1 protector was designed
to be used uniquely on motorbikes. Do not use for any other
application (skiing, skating, horseback riding, cycling, etc.) The
back protector protects against impacts with the ground or
an obstacle during an accident. It may reduce injury severity
(contusions or fractures). No product or protection system can
offer total protection against injuries or damages to an individual
or an asset in the event of fall, collision, impact, loss of control, or
other. Likewise, this back protector may not totally prevent injuries
to the spinal column. The back protector does not offer protection
against the risks of perforation, cut or penetration of an object.
Use of this product must not encourage exceeding any limits or
taking additional risks.
2 SIZING SELECTION
Refer to the table below to choose your size:
Selecting a protector that is too large may lead to a risk of
interference with the helmet, causing dangerous driving
conditions.
Back protector
Waist-shoulder
length
3 Fit instructions
The IMP moto back 1 and the IMP moto back protector must
be correctly fitted and worn, in order to effectively protect the
protection areas. To obtain optimum protection and comfort,
please select the right size and ensure that the airbag product is
fitted correctly to your body. Close all of the closures (zip closures),
Size 1 Size 2
37-42 cm 40-45cm
Size 3
42-47cm