KLIM Ai-1 Airbag Vest Benutzerhandbuch Seite 15

(e.g. 100+90=190 and 190/2=95 cm | 39+35=74 and 74/2=37
inches)
2) Measurements of your jacket or coat
The following measurements are taken while stretching the jacket.
All the elastic fabrics and elasticated parts in the direction of
measurement taking must be fully stretched. Place your closed
jacket on a flat surface.
A) While stretching the jacket until the elasticated parts and fabrics
are taut, measure the width of the jacket under the armpits in cm
(e.g. 58cm | 22 inches)
B) In the same way, while stretching the jacket fully, measure the
width of the jacket at navel level in cm (e.g. 52cm | 20 inches)
g C) Add these 2 measurements (e.g. 58+52=110 cm | 22+20=42
inches)
Your jacket is compatible with the vest if the difference between
the first (95cm | 37 inches) and the second result obtained in C
(110cm | 42 inches) is greater than or equal to 13cm | 5.2 inches.
If you are not sure, ask your local reseller for advice.
Example: 110-95=15cm | 42-37=5 inches... your jacket is
compatible.
If your jacket is not compatible, do not use the airbag vest with
d your jacket. Wearing the airbag vest in such a case may cause the
. airbag to function improperly and can cause injury.
If you need help figuring out sizing, contact KLIM customer
service.
NOTIFIED BODY, ADDRESS AND LABRATORY CE NUMBER (S)
The product has been tested according to
CRITT protocol AMC-012 and EN17092-6: 2020
Notified body Aliénor Certification n°2754
ZA du Sanital
21 Rue Albert Einstein
86100 CHATELLERAULT
FRANCE
PRODUCTION YEAR OR SERIAL NUMBER (T)
Production year 2019
EXPIRATION DATE OF ITEMS (U)
Refer to section (N)