Product Description; Structure And Function; Control Elements - Abicor Binzel ABICAR 1200 PRO 42V Originalbetriebsanleitung

ABICAR 1200 PRO 42V

4 Product description

4.1 Structure and function

Fig. 2
A Cross slide
B Adjusting screw, vertical
C Welding torch mount
D Securing the torch
E Stop lever for welding torch tilt angle
F Handle
G On/Off switch with LED
H 2× guide arms
I 4× guide arm knurled screws
J 2× end switches
A
Q
J
P
The device is a portable welding tractor to which a welding torch can be attached for semi-automatic
longitudinal welding on magnetic surfaces. The permanent magnet integrated into the housing allows
welding work to be carried out on all magnetic surfaces in the horizontal and vertical position. The device
consists of a housing, a drive system with control, a cross slide, several guide arms and a welding torch
mount. The device is uniformly driven by four wheels. The cross slide allows the precise adjustment of the
welding position in the vertical and horizontal position. Different locations on the workpiece can be reached
with the various guide arms. The limit switches stop the welding process and the travel movement of the
device upon contact.
For pendulum movement of the welding torch during welding, the device can be fitted with an oscillator
(accessory).

4.2 Control elements

Fig. 3
A LED display
B Rotary knob/push button F1
C Rotary knob/push button F2
D Weld start signal switch (Test / O / I)
E Interface connector for power supply/power source
communication
A
I
Structure and function
B C
O
N
M
L K
Operating panel
K Securing lugs
L Connection cable connector for power supply/power
source communication
M Welding parameter button up/down (+ / 0 / −)
N Magnetic lever
O Operating panel
P 4× drive wheels
Q Adjusting screw, horizontal
R Oscillator connection bush
S Oscillator
D S
R
E
F
G
H
I
I
J
F Welding parameter button up/down (+ / 0 / −)
G Travel direction switch (right / O / left)
H Speed controller
I 6× mounting screws M4 × 8
B C
H
4 Product description
D E
G F
EN - 11