Advanced Settings - poolstar POOLEX O' SPA Installations- Und Gebrauchsanleitung

4.12

Advanced settings

WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
The system's settings can be checked and adjusted via the remote control by following
these steps
Caution, some settings cannot be modified, check the settings table for more information.
Step 1: Switch off the heat pump.
Step 2: Keep pressing
Step 3: Select the desired setting using the down and up arrows
Step 4: Press on to select the setting to be adjusted.
Step 5: Press on to save the new value.
Parameters Indication
C0 Setting inlet water temp in heating mode
C1 Water temp difference for restart in heating mode
C2 Auto restart(0-without, 1-with)
C3 Protection setting for too high discharge temp
C4 Max. inlet water setting temp in heating mode
C5 Min. inlet water setting temp in heating mode
C6 Difference water temp to stop in heating mode
C7 Setting inlet water temp in cooling mode
C8 Water temp difference for restart in heating mode
C9 Difference water temp to stop in cooling mode
C10 Max. inlet water setting temp in cooling mode
C11 Min. inlet water setting temp in cooling mode
C12 Protection setting for too low ambient temp
C13 Protection setting for too high ambient temp
C14 Protection temp difference for ambient temp
C26 AUX turn On ambient temp in heater Auto mode
C27 AUX water temp difference for restart in heater Auto mode
C28 AUX water temp difference for restart in Manual mode
C29 Setting inlet water temp in Auto mode
C30 PUMP parameter
C31 PUMP working interval of time
C32 AUX parameter
H0 Defrosting mode activation timer
H1 Defrosting mode max. duration
H2 Defrosting exit coil temp
H3 Defrosting entry coil temp
H4 Temp difference between defrosting entry ambient temp
and coil temp
H5 Min. Ambient temp to entry defrosting
P1 CN6 function selection
When OFF, pressing on
4. Use
for 3 seconds to access the settings.
for 5 seconds resets the settings to factory settings.
Default
Adjustment range
V.
15°C~40°C 38°C
1°C~10°C 3°C
0~1 1
30°C~120°C 110°C
30°C~60°C 40°C
5°C~30°C 15°C
0°C~18°C 0
7°C~30°C 26°C
0°C~18°C 3°C
0°C~18°C 0
20°C~35°C 30°C
2°C~18°C 7°C
-25-20°C -7°C*
35-60°C 42°C
1-10°C 1°C
0°C ~ 20°C 15
1~5°C 5
1~5°C 2
7°C~40°C 38°C
0 (deactivated) 0
/1 (activated)
30-90 min 60 min
0 (deactivated) 1
/1 (activated)
1~240min 45 min
1~25min 8 min
1~25°C 12°C
-20~20°C -1°C
0~15°C 5°C
0~20°C 20°C
0 : no function 3
1 : high pressure
switch (reserved)
2 : water flow switch
(reserved)
3 : in.grip function
Comments
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
adjustable
EN | 25