Status Values And Advanced Settings - poolstar POOLEX NANO ACTION Installations- Und Gebrauchsanleitung

4.3

Status values and advanced settings

WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
The system's settings can be checked and adjusted via the remote control by following these
steps
Step 1 : Keep pressing
Step 2 : Press
and
Step 3 : Press to select the setting to be modified.
Note, some settings cannot be modified. Consult the settings table for further information.
Step 4 : Press and
Step 5 : Press to set the new value.
Step 6 : Press to return to the main screen.
Parameter d
16 | EN
4. Use
until you enter the settings verification mode.
for see the parameters.
to adjust the setting value.
Value 40