Handicare 2000 SIMPLICITY Installationsanleitung Seite 28

Fitting the Style seat (powered)
Fitting the Style seat
(powered)
Items required:
• Seat
1 Remove the seat stem from the packaging
(Figure 85).
2 Attach the seat stem to the chassis
(Figure 86).
3 When lowering the seat onto the stem, ensure
the seat is in the ride position and the seat
switch roller does not get damaged by the
switch cam (Figure 87). There is a gap in
the cam where the roller will fit (Figure 88).
4 Drop the seat onto the stem (Figure 89).
5 Feed the seat cables through the seat stem
(Figure 90).
6 Fit the plastic cap to the seat frame
(Figure 91).
7 Tuck the seat cables into the slot of the
plastic blanking plate (Figure 92).
Figure 85
28 HANDICARE 2000 SIMPLICITY / STYLE INSTALLATION MANUAL
Tools required:
• 13mm Socket
• 4mm Allen key
• No. 2 Pozi-drive
Figure 86
Figure 87
Figure 88