Herunterladen Inhalt Inhalt Diese Seite drucken

Schuller L3 Bedienungsanleitung Seite 35

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Material
Permitted cleaning
Ceramics
Use a soft, lint-free cloth
and a little lukewarm
water.
Glass
Use a soft, lint-free cloth
Clear glass, glazed
and a small quantity of
glass
glass cleaner.
Worktops
Moist cloth and some
HPL, plastic
mild cleaning agent, like
universal cleaner.
Cabinet inner sides
Moist cloth and some
Plastic
mild cleaning agent, like
universal cleaner.
Anodised alumini-
Use a soft, lint-free cloth
um surface
and a little lukewarm
water. In the case of light
soiling, some cleaning
agent, such as universal
cleaner.
Vegan leather
Carefully wipe off with a
microfibre cloth and mild
soapy water and allow
to dry.
Strong level of dirtiness
Cleaning agent, such as univer-
sal cleaner.
Universal cleaner, grease sol-
vent or moist dirt eraser. Move
the sponge across the surface
with a slight amount of pres-
sure.
Allow the undiluted universal
cleaner to work in a bit and
wipe off with a moist cloth. De-
grease the surface with grease
solvent via gentle abrasion.
Allow the undiluted universal
cleaner to work in a bit and
wipe off with a moist cloth.
Anodizing cleaner pure on a
dry cloth. In the case of severe
soiling of nylon fleece, clean by
rubbing with increased pres-
sure.
Soft hand brush Remove oils,
fat and heavily staining food-
stuff immediately
  Cleaning and care
Notes
When cleaning with universal cleaner,
wipe off with a moist cloth to avoid
streaks.
Too much pressure can result in shiny
spots. After cleaning, finish off with a
damp cloth and then dry thoroughly.
In the case of worktop decors with
wooden structures, always wipe in the
direction of the grain to remove all the
dirt particles.
When cleaning with universal cleaner,
wipe off with a moist cloth to avoid
streaks. Polish the surface after clean-
ing with a fresh, soft and dry cloth.
When using standard surfactant
cleaners, always adhere to the dosing
instructions provided by the manufac-
turer. An additional treatment using
a leather-care agent is not required.
Is any chemical bleaches or abrasive
cleaning agents. Staining of the mate-
rial by means of jeans or other textiles
are excluded from the warranty.
| EN
35

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis