Assembly And Installation - Schuller L3 Bedienungsanleitung

EN |
Assembly and installation
Damage to handles and handle strips
▪ Improper handling causes damage to handles and han-
dle strips.
– Avoid mechanical abrasion, which can occur, for ex-
ample due to polishing with rough linen cloths, finger
nails or rings.
– Protect the handle strips against still liquids in order
to avoid material swelling.
Damage to fittings and guide rails.
▪ Improper handling or soiling can result in damage to
fittings and guide rails.
– Keep the guide rails clean in order to ensure smooth
running when pulling out. Remove dirt particles imme-
diately with a brush.
Do not treat the fittings or guide rails with grease or
–
oil.
26

Assembly and installation

Danger due to electric currents
There is a risk of injury from electric shock if the housing
of an installed electrical device is opened or if it is han-
dled improperly.
Electrical installations may only be carried out by
`
qualified experts in compliance with the safety
regulations.
Before starting any work, switch off the power and
`
secure the fusebox so that unauthorised power-up
cannot occur.
Risk of injury due to falling or toppling furniture!
Unsecured furniture can result in severe or lethal injuries.
Safety device installations may only be carried out
`
by qualified experts in compliance with the safety
regulations.
Only use electronic devices (dryers washing machine)
`
with electronic balance.
DANGER
DANGER