General - Schuller L3 Bedienungsanleitung

Contents
General .......................................................................................... 21
Safety ............................................................................................ 22
Property damage due to improper handling........................ 25
Assembly and installation ........................................................ 26
Operation ...................................................................................... 27
Luminaires .................................................................................... 30
Disposal ......................................................................................... 31
Maintenance and repair ............................................................ 31
Cleaning and care ....................................................................... 32

General

Introduction
So that you can continue to enjoy your motorized top cab-
inet with glass blind for a long time, please take note of
the following important information on safety, operation
and cleaning.
Your dealer will always be happy to provide you with any
other information that you may require.
For the sake of clear classification, always indicate the
manufacturer identification registration number which is
located on the inner wall of the unit.
Schüller Möbelwerk KG
Rother Straße 1
91567 Herrieden
Germany
Herstelleridentifikations-Kennzeichen
0000000.00
The instructions are intended for end users; read
them carefully before use (especially the "Safety
information") and act accordingly.
Store the instructions at the place of use for the
lifetime of the furniture. If case of sale, also transfer the
instructions.
Failure to observe the proper use or safety information
can result in danger to the user and material damage.
Compliance with the operating instructions
▪ will help to prevent danger.
▪ will increase reliability during use.
▪ will increase the lifetime of the furniture.
Legal notice
Please note the implications for liability if damage arises
from one or more of the following causes:
▪ Unintended use.
▪ Failure to observe the safety instructions.
▪ Improper use of the furniture.
▪ Operation with improperly attached or non-functioning
safety devices (e.g. for toppling prevention.
Unauthorised conversions and design changes.
▪
▪ Repairs or tampering undertaken by persons who are
neither authorised nor trained to carry out such actions.
▪ Accessories, spare parts and additives that are the
cause of the damage and which the manufacturer has
not approved. The manufacturer will not accept any re-
sponsibility for the resultant consequential damage.
| EN
General
21