Monacor WAP-204RS Bedienungsanleitung Seite 41

MENU ITEMS
Time/Date
Set Time/Date
Auto update
Set format
*
Set timezone
*
Dayli g ht savin g s
Inactive Standby
Lan g ua g e
Factory reset
Software update
Software up g rade
Setup wizard
Info
Backli g ht
*available only for automatic time update via the Internet
The general procedure for using the menu: Turn the knob to select a menu item or a setting
and press the knob to call up a menu item or to confirm a setting . To return to the previous menu
level, press the button BACK or, from an input menu as shown in fig . 18, select the command
button and confirm .
CANCEL
FUNCTIONS
Setting the date and time
Manual setting of time / date (
Automatic time update (
☞
12-hour format or 24-hour format (
Selection of time zone (
☞
Setting of daylight saving time / standard time (
Automatic standby in case of inactivity: The device can be set in such a way that it will
automatically go to standby when it has not been operated for a certain time period. Select the
time period (2, 4, 5 or 6 hours) or the setting
Menu language (English, Danish, Dutch, Finnish, French, German, Italian, Norwegian, Polish,
Portuguese, Spanish, Swedish, Turkish)
Reset of the device (to reset all settings to their factory settings, to disconnect the network
connection and to delete all network connection data, to delete all stations /podcasts saved
and the DAB station list)
When this menu item has been called up, confirm the prompt
the device.
Software update: The following options are available:
check at regular intervals if a new software version is available on the Internet) and
(device will check immediately if a new software version is available on the Internet).
Important: Never disconnect the device from the power supply while the software is being
updated; the device may be damaged!
for service only
Setup of the device (chapter 7.2)
The setup wizard will guide the user step by step through all basic settings required.
Display of hardware and software information about the device:
e. g. = device ID,
Radio ID
Display backlight
When this menu item has been called up, three menu items are available:
– : to set the brightness of the display backlight when the device is on (
On level
and are available).
Low
– : to set the brightness of the display backlight when the device is on standby. Two
Dim level
brightness levels are available (
– : to set the time the device must be on standby before the display backlight switches
Timeout
to . Select the desired time or
Dim­Level
chapter 7.2, step 3, fig. 13)
☞
chapter 7.2, step 3, fig. 10)
chapter 7.2, step 2)
☞
chapter 7.2, step 3, fig. 11)
chapter 7.2, step 3, fig. 12)
☞
(= no automatic standby in case of inactivity).
Off
= name of the device in the network
Friendly Name
and ) and an option for no display backlight (
Medium Low
(the display will not switch to
On
with
Proceed? YES
(device will
Auto­check settin g
Check now
Hi g h
Dim­Level
to reset
,
Medium
).
Off
at all).
41