Safety Notices For Battery-Powered Lamps; Use And Treatment Of This Battery-Powered Tool; Service; Special Safety Directions For Battery-Operated Tools - Parkside PLSA 20-Li A1 Originalbetriebsanleitung

GB
Safety notices for battery-
powered lamps
• Do not cover the battery-powe-
red LED flood lamp when in use.
The battery-powered LED flood
lamp becomes hot during use
and can cause burns.
• Do not look into the light beam.
Do not aim the light beam at
people or animals.
• Do not allow children to use the
battery-powered LED flood lamp.
They could inadvertently blind
other people or themselves.
• Lamp not for children under 14
years of age!
• Check that the battery-powered
LED flood lamp holder is stable.
There is a risk of injury if the
battery-powered LED flood lamp
falls down.
• The light sources can only be
replaced by the manufacturer wi-
thout permanently damaging the
surrounding product.
• The operating device (power
adapter) can be replaced by the
end user with an original spare
part, which is available in our
online shop under the article
number 80001284.
Use and treatment of this
battery-powered tool
• Only recharge the battery using
chargers recommended by the
manufacturer. If a charger that
has been designed for a parti-
cular type of battery is used to
charge other batteries, there is a
risk of fire.
20
• Only use the battery that is in-
tended in an electric tool. The
use of other batteries may create
a fire hazard and lead to injury.
• When not in use, keep batteries
away from paper clips, coins,
keys, nails, screws or other small
metal objects that could cause
the contacts to be bridged. A
short circuit between battery
contacts can result in burns or a
fire.
• When misused, fluid may leak
from the battery. Avoid any
contact with it. On accidental
contact, wash in running water.
If the fluid comes into contact
with the eyes, seek medical as-
sistance also. Leaking battery
fluid can cause skin irritation or
burns.

Service

• Have your power tool serviced
by a qualified repair person
using only identical replace-
ment parts. This will ensure that
the safety of the power tool is
maintained.
Special safety directions for
battery-operated tools
• Ensure that the device is swit-
ched off before inserting the
battery. Inserting a battery into
a power tool that is switched on
may result in accidents.
• Recharge the batteries indoors
only because the battery charger
is designed for indoor use only.
• To reduce the electric shock ha-
zard, unplug the battery charger