Malfunction Table - KKT KOLBE EBM4502ED Benutzerhandbuch

Malfunction table

Malfunction table
Problem
The appliance does not work.
The appliance does not work.
appears in the display panel.
0:00 is in the display panel.
The microwave does not switch
on.
It takes longer than before for
the food to heat up in the mic-
rowave.
Turntable grates or grinds.
A particular operating mode or
power level cannot be set.
E1 appears in the display panel.
E4 appears in the display panel.
E11 appears in the display
panel.
E17 appears in the display
panel.
68
Possible cause
Faulty circuit breaker.
Plug not plugged in.
Power cut
Childproof lock is active.
Power cut
Door not fully closed.
The selected microwave power level ist too
low.
A larger amount than usual has been
placed in the appliance.
The food was colder than usual.
Dirt or debris in the area around the turnta-
ble drive.
The temperature, power level or combined
setting is not possible for this operating
mode.
The thermal safety switch-off function has
been activated.
The thermal safety switch-off function has
been activated.
Moisture in the control panel.
Rapid heating has failed..
Information
Look in the fuse box and check that the
circuit breaker for the appliance is in
working order.
Plug in the plug.
Check whether the kitchen light works.
Deactivate the childproof lock (see
section: Childproof lock).
Reset the clock.
Check whether food residue or debris
is trapped in the door.
Select a higher power level.
Double the amount = almost double the
cooking time.
Stir or turn the food during cooking.
Clean the rollers under the turntable
and the recess in the oven floor tho-
roughly.
Choose permitted settings.
Call the after-sales service.
Call the after-sales service.
Allow the control panel to dry.
Call the after-sales service.