Operation; Starting Up; Resetting The Reset Button - Truma MonoControl CS T Gebrauchsanleitung

Operation

4 Operation
4.1

Starting up

Open the gas remote switch if present�

Connect the gas cylinder and ensure that the hose connection is

in perfect condition�
Open the cylinder valve�

Firmly press the hose rupture protection on the high-pressure

hose for 5 seconds if necessary�
Reset the reset button if necessary�

The system is now ready for operation� The gas appliances can be
used�
4.2

Resetting the reset button

Fig� 5
To reset the gas pressure regulator, press the yellow reset button

with the T20 Torx pin of the screw aid in the housing, gently turn
in a clockwise direction and hold for 10 seconds�
Ensure that the yellow reset button remains engaged� Repeat

the procedure if necessary� Move the machine into a horizontal
position if necessary�
36 EN
MonoControl CS_T
50020-00976 ∙ 00 ∙ 08/2022