Maintenance - Truma MonoControl CS T Gebrauchsanleitung

Maintenance

Screw the screw cap back onto the test connection�

Press the yellow reset button with the T20 Torx pin of the screw

aid in the housing and gently turn in an anti-clockwise direction�
Restart the gas pressure regulator� See chapter „Operation"�

Fig� 6
1
Triggering element
2 Reset button
3 Screw cap
5 Maintenance
The gas pressure regulator is maintenance-free�
Do not remove covers on the gas pressure regulator under any

circumstances�
If in doubt, contact Truma Service�

The user must arrange for the gas system to be tested in accordance
with the relevant national regulations (e�g� in Germany every 2 years)
by a liquid gas expert� The test must be confirmed on the respective
test certificate (G 607)�
In countries where testing is not mandatory, it is advisable to have the
gas system tested every 2 years for your own safety�
38 EN
2
1
MonoControl CS_T
3
50020-00976 ∙ 00 ∙ 08/2022