Replacing Of The Illuminants - Pkm SBS400NF IX-KH Bedienungsanleitung

WARNING! Do not use hairdryers, electrical heaters or other technical
devices to accelerate the defrosting-progress. RISK OF ELECTRICAL
SHOCK!
1. Remove the contents from the appliance and put them into a cooling box.
2. Place a container in front of the appliance to catch the water.
3. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4. Do not use hot water to accelerate the defrosting operation.
5. Remove the big pieces of ice first.
6. Afterwards remove the small pieces of ice.
7. Wipe and dry the appliance and door seals with dry and soft cloths.
8. After cleaning leave the door open for some time to ventilate the appliance.
NOTICE! If the appliance has been disconnected from the mains for a
longer period of time, let it operate for approx. 3 - 4 hours with the factory-
set temperatures / mode (depending on model) before you place any fresh
or frozen food in the appliance. If you place food in the appliance before it
has reached its normal operating temperature, the food can thaw and / or
spoil.

7.4 Replacing of the illuminants

WARNING! LED-illuminants must always be replaced by a qualified
person only. If a LED-illuminant is damaged, please contact a qualified
professional (not covered by the guarantee).
NOTICE! Any damage that is caused to your appliance by improper
replacement of an illuminant will not be fixed free of charge, even if the
guarantee period of the appliance is still valid.
~ ~
99