Rational iCombi Pro Electric 6-2 Umbauanleitung Seite 9

Modification Instruction
MI_2306: Bus adapter iCombi Pro 6-2/3 – Installation
iCombi Pro Electric
6-2/3
1 MI_2306: Bus adapter iCombi Pro 6-2/3 – Installation
Topics
The information describes the installation of the bus adapter for iCombi Pro
6-2/3 in combination with an UltraVent/UltraVent Plus.
With an iCombi 6 2/3 Index J, the PCB bus adapter for data transfer of the Ul-
traVent/UltraVent Plus will be omitted from 20/03/2023.
For combinations of an UltraVent/UltraVent Plus up to 01/02/2023 with an
iCombi 6-2/3 from 20/03/2023, the bus adapter retrofit kit (UltraVent
iCombi XS) Art. no.: 87.01.966S is required.
Affected product/accessories
iCombi
6-2/3
n
Required tool
Standard
n
Required components
General information
Enter the installation of the component on the service level ("Component
replacement" tab). This is an integral part of the maintenance history.
Target group
This document is intended for skilled technicians, who have been certified
n
by the manufacturer after attending training and safety instructions.
Installation, inspection, maintenance, and repair work must only be carried
n
out by trained technicians.
It is recommended that only technicians authorised by the manufacturer
n
perform inspection, maintenance and repair work.
15 min
Component
Retrofit kit for bus adapter
Standard
NOTICE
2023 / 06
31/03/2023
Article number
87.01.966S
9 / 104