Rational iCombi Pro Electric 6-2 Umbauanleitung Seite 12

1 | MI_2306: Bus adapter iCombi Pro 6-2/3 – Installation
4. Connect the data transfer cables to the PCB.
- Unplug the bus termination on the fan motor and plug in the data trans-
fer cable from the PCB.
- Connect the data transfer cable to the UltraVent/UltraVent Plus.
5. Screw the ground to the pump holder on the steam generator.
6. Insert the assembly into the unit again and screw on the assembly.
>
Installation is complete.
12 / 104