Electrical Connection - KKT KOLBE EB8013ED Benutzerhandbuch

Installation
Building in
• Do not hold or carry the appliance by the door handle. The door handle cannot hold the
weight of the appliance and may break off.
Steps
1. Carefully push the oven into the box, making sure
that it is in the centre.
2. Open the door and fasten thewith the screws that
were supplied.
Important Information
!

Electrical connection

The appliance is fitted with a plug and must only be connected to a properly
installed earthed socket.
Only a qualified electrician who takes the approriate regulations into account
may install the socket or replace the connecting cable. If the plug is no longer
accessible following installation, an all-pole isolating switch must be present
on the installation side with a contact gap of at least 3 mm. Contact protection
must be ensured by the installation.
Fuse protection: see instructions for use-technical data.
70
• Fully insert the appliance and centre it.
• Do not kink the connecting cable.
• Screw the appliance into place.
• The gap between the worktop and the appliance
must not be closed by addtional battens.