Unpacking; Before First Use - Scheppach MS226-53E SE Original Bedienungsanleitung

Lithium-Ion-Battery
Lithium-Ion-bat-
tery system
Min. charging time
Charging current
AC-input of the
charging device
(variable)
Battery capacity
Subject to technical changes!
Noise & vibration
m Warning: Noise can have serious effects on
your health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Noise data
Sound pressure L 84,6 dB (A)
PA
Uncertainty K 3 dB(A)
PA
Sound power L 96,2 dB(A)
WA
Uncertainty K 1,86 dB(A)
WA
Vibration parameter
Vibration a 7,218 m/s²
hv
Uncertainty K 1,5 m/s²
h
Reduce noise generation and vibration to a minimum!
• Use only equipment that is in perfect condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.
When using the petrol lawn mower for extended peri-
ods, vibration-induced circulatory problems may oc-
cur (white finger disease).
We cannot give exact details about the duration of
use in this case because it is different for each indi-
vidual.
The following factors can influence the condition:
• Circulatory problems in the user's hands
• Low outside temperatures
• Extended periods of use
We therefore recommend you wear warm work gloves
and take regular breaks.

7. Unpacking

Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available)
Check that the delivery is complete.
Check the device and its spare parts for possible
damage caused by transportation.
32 | GB
20 V
200 min
0,6 A
100 - 240 V
2000 mAh / 37 Wh
 www.scheppach.com
In the event of complaints, you must contact the dis-
tributor without delay. Claims at a later stage will not
be accepted.
If possible, store the packaging until the warranty pe-
riod has expired
Before handling the device, make yourself familiar
with it by reading the operating instructions.
For accessories, consumables and spare parts, only
use original parts. Spare parts are available from
your stockist.
Include our item number, the device model and year
of manufacture in your order.
m Attention!
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!

8. Before first use

m ATTENTION!
Always make sure the device is fully assembled
before start-up!
Some parts of the mower come disassembled. For
quick and easy assembly, read and follow the instruc-
tions below.
Important! You will need the following additional tools
(not supplied) for assembly, and also for maintenance
work:
• A 1 litre measuring jug (oil/petrol resistant)
• A petrol can (5 litres is sufficient for approx. 6 op-
erating hours)
• A funnel (suitable for the tanks petrol filler neck)
• Household wipes (to wipe up oil/petrol residue; dis-
pose of these at a filling station)
• A petrol suction pump (plastic, available from DIY
stores)
• An oil can with hand pump (available from DIY stores)
• 0,5 litre of engine oil (SAE 30)
Assembly
1. Take the mower and attachment parts out of the
packaging and check that all parts are present.
2. Attach the lower push bar (4a) to both sides of the
mower with one screw (a), 1 washer (c), 1 plastic
star grip nut (d) each. Make sure that the cables,
which will be attached later, are not in the way (Fig.
2-3).
3. Attach the upper push bar (4) on the lower push
bar with one quick-release lever (5), one wash-
er big (b), one washer small (c) and one plas-
tic star grip nut (d) each on both sides (Fig. 4-5).
Note the correct alignment of the quick-release le-
ver fixation slice ensuring the quick-release function
remains intact.
4. Guide the gas throttle through the electric starter
unit as shown in figure 5a.