Using The Conference Units; Technician Menu - Shure Microflex Complete Wireless Bedienungsanleitung

• Available in 16 inch (40 cm), 20 inch (50 cm), and 25 in (63 cm) lengths, as well as the MXC406/MS mini­shotgun micro­
phone
Securing the Microphone to the Conference Unit
1. Insert the microphone into the microphone connector.
2. Insert the 1.5 mm hex wrench into the hole next to the microphone on the conference unit and turn counterclockwise.

Using the Conference Units

Once a unit has powered on, tap the touchscreen to access the home screen, or insert a pre­programmed NFC card if avail­
able.
Use the navigation pane to move between menus for different options and information on the MXCW640.
1. Home screen: Displays a combined speaker and request list.
2. Voting menu (chairperson only): Chairpersons can set up and monitor voting sessions.
3. Settings menu: View battery status, hide status bar, change brightness, and change screen language.
4. Chairperson control buttons (chairperson only)

Technician Menu

Additional conference unit information and settings are in the technician menu. To access the menu:
1. Tap the gear icon to enter the settings menu.
2. While at the top of the settings page, hold down on both volume control knobs and tap on the right side of the touch­
screen.
From this menu you can access 4 different screens to perform the following actions:
Shure Incorporated
16/94