Alarm Test - x-sense Link XS01-WR Bedienungsanleitung

08
How to Disconnect
Quickly press the test/silence button 4 times; the smoke alarm will beep
once. Then, hold down the button until it beeps once more to disconnect.
After disconnecting, it can be reconnected to the same network, or added to
a new network.
+
NOTE: The X-Sense Link wireless interlinked alarms in one multi-pack
have already been interconnected. To create a new network, you will rst
need to disconnect each alarm individually in this multi-pack to avoid
having them all join the same network.

Alarm Test

Be sure to test your smoke alarms when you turn them on for the fi rst time,
or when the group confi guration has changed. In addition to the weekly
tests you should perform, it is recommended to test the alarm after returning
from a long trip or vacation.
+
If your X-Sense Link XS01-WR is interconnected to other wireless smoke
alarms, we recommend that every individual smoke alarm is tested during
the weekly test.
Test a single alarm
Action Press the test/silence
button.
Test all interconnected smoke alarms
Hold down the test/silence button.
09