Checchi & Magli BABY TRIUM Bedienungs- Und Wartungsanleitung Seite 77

Replacing the ploughshare
UN41 0194MG
Proceed as outlined below.
1) Remove the circlip (A).
2) Unscrew the wing nut (B).
3) Lift and hold the clamping device (D).
4) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
Scrapping the work vehicle
The scrapping operations must be handled by special-
ised personnel with suitable skills for the job.
English language
INFORMATION CONCERNING REPLACEMENTS
C C
D
5) Hold the ploughshare and remove the screw (C) and
washer (E).
For the assembly, carry out the same operations as for
disassembly but proceeding in reverse order.
The components removed must be sorted according to
the type of materials they contain and in compliance
with the laws in force concerning waste collection, sort-
ing and disposal.
35
8
Use and maintenance