Defrosting; Before Getting Started - hanseatic AC925EC3-S00E Gebrauchsanleitung

Display Micro-
indicator wave
■
C-1
■
C-2
C-3
■
C-4
1. Select the "Combi" function using the
"+30s" control dial (11).
On the display (7), the
illuminate and the
C-1
pear.
2. Set the desired combi function using the
"Confirm/Start" control dial (14).
3. Press the "Confirm/Start" control dial (14)
to confirm the setting.
The desired combi function as well as the
M and S indicators are now shown on
0 00
the display (7).
4. Set the desired cooking time using the
"Confirm/Start" control dial (14).
5. Press the "Confirm/Start" control dial (14)
to confirm the setting.
The cooking process will start.
During operation, the
flash and the countdown for the cooking
time will be shown.

Defrosting

WARNING
Health hazard!
Defrost water may contain hazardous
germs.
■ Avoid any physical contact.
■ Pour away the defrost water and do
not use it for anything else.
■ Clean used crockery thoroughly.
Grill Con-
vection
■
■
■ ■
■ ■
Combi. indicator will
indicator will ap-
Combi.
indicator will
The heating modes

Before getting started

• Ideally, use food which has been frozen at
–18 °C in portions as thin as possible.
• Remove all packaging and weigh the dish.
The weight is required to ensure the cor-
rect settings.
• Remove the packaging.
• Place the food in an appropriately large
container, which can then collect the de-
frost water.
• Do not cover the food.
– : Defrosting by weight
d1
– : Defrosting by time
d2
Defrosting by weight
1. Select the "Defrost" function using the
"+30s" control dial (11).
On the display (7), the
illuminate and the indicator will appear.
d1
2. Press the "Confirm/Start" control dial (14)
to confirm the setting.
The indicator and the
d1
are now shown on the display (7).
3. Set the desired weight using the "Confirm/
Start" control dial (14).
You can select a weight between 100 g and
1800 g.
4. Press the "Confirm/Start" control dial (14)
to confirm the setting.
The defrosting process will start.
During operation, the
flash and the countdown for the defrosting
time will be shown.
Defrosting by time
1. Select the "Defrost" function using the
"+30s" control dial (11).
On the display (7), the
illuminate and the indicator will appear.
d1
2. Select the function using the "Confirm/
d2
Start" control dial (14).
3. Press the "Confirm/Start" control dial (14)
to confirm the setting.
The indicator and
d2
cators are now shown on the display (7).
Page EN-23
indicator will
Defrost
g indicator
000
Defrost
indicator will
Defrost indicator will
M and S indi-
0 00