Settings; Standby Mode; Eco" Setting; Appliance Door And Light - hanseatic AC925EC3-S00E Gebrauchsanleitung

Settings

Standby mode

New settings can only be made when the ap-
pliance is in standby mode.
VITAL ECO
• To switch the appliance to standby mode,
press the "Stop/Delete" button (12) twice.
26
In standby mode, the time is shown on the
display; the function indicator

"ECO" setting

VITAL ECO
The display light can be switched off when
the appliance is set to standby mode.
• To switch the display light off, press the
"ECO" button (13).
• Press any key or rotate one of the control
dials to switch the display light back on.
Stopp/Löschen
(12)
Kitchen
Kitchen
flashes.
Stopp/Löschen
(13)
Settings

Appliance door and light

The cooking chamber light switches on auto-
matically when the appliance door is open or
the appliance is in operation.
If the appliance door is opened while the ap-
pliance is in operation, the cooking process
will be stopped.

Setting the cooking time

Cooking time can be set in the following in-
crements:
Cooking time
0 to 1 minute
1 to 5 minutes
5 to 10 minutes
10 to 30 minutes
30 to 95 minutes
Once the set cooking time has expired, a
signal sounds and the appliance switches to
standby mode. The time is shown on the dis-
play (7).
Fan operation after cooking
time ends
After the cooking time has finished, the fan
will continue to run for a few minutes to cool
the appliance down. The duration depends
on how hot it is inside the appliance.
Page EN-19
Steps
5 seconds
10 seconds
30 seconds
1 minute
5 minutes