Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.8 Function keys / Remote control displays / Remote control menu description
(Niova 350/500 Plus)
Channel selection display
Display of selected
Mode
Button minus < - >
Button channel selection
8.8.1 Selecting the channel on the remote control / synchronising the luminaire
Remote control
• Before using the remote control for the first time, insert sufficiently charged rechargeable
batteries or compatible batteries
• Switch the light on at the ON / OFF switch (15) (if not already done). The remote control does
not work if the main switch on the fixture is turned off.
• Press the ON / OFF switch on the remote control once briefly to activate the display when
the screen is in standby mode.
• Activate the channel selection of the remote control by pressing the channel selection button.
• Check the currently selected settings on the display of the unit and the remote control.
The selected channel on the remote control must match the channel set on the unit.
• The currently set channel of the remote control is shown in the display of the remote control
• Set the desired channel of the remote control by pressing the plus <+> or minus <-> button on
the remote control.
• Channels from 1 to 99 can be set
Button <up>
(2x AAA 1.5 V) into the remote control.
Display
Battery charge level
Display Colour
temperature
Brightness display
Button <ON/OFF>
Plus button <+>
Button for mode
selection CCT /RGB
Button <down>
Start button for
<FUN> mode
47
Werbung
Inhaltsverzeichnis
