Switching The Unit On / Off On The Unit; Setting The Brightness (Dimming Function) On The Unit; Setting The Colour Temperature On The Unit - Walimex Pro Rainbow 60W RGBW Gebrauchsanleitung

8. Operation and handling of the unit
Display
Power socket
round
Battery status
selection button

8.1 Switching the unit on / off on the unit

• Switch the unit on with the ON/OFF switch (6).
• The luminaire is ready for operation.
NOTICE
Please note that the luminaire will not function if the batteries are not sufficiently charged!

8.2 Setting the brightness (dimming function) on the unit

1. Switch the unit on with the ON/OFF switch (6) (if not already done)
2. By default, the dimming function for brightness adjustment is pre-set after the luminaire
is switched on.
3. You can adjust the brightness (dimming function) by pressing one of the multifunction
push/turn switches on the front or back of the luminaire (7+11).
5. Turn one of the multi-function push/turn switches (7+11) to continuously adjust the desired
brightness.
6. The selected luminosity is shown (5) in the display as a percentage
7. The luminous intensity is adopted by the unit immediately after turning the selection dial,
stored and shown in the display.
8. The luminosity can be adjusted in steps of 1 from 20 to 100%.

8.3 Setting the colour temperature on the unit

1. Switch the unit on with the ON/OFF switch (6) (if not already done)
2. By pressing the colour temperature selection button , you can adjust the colour
temperature.
3. The colour temperature can be adjusted in steps of 10 from 2,700 to 9,999 Kelvin.
4. Turn one of the multifunction push/turn switches to set the desired colour temperature.
5. The selected colour temperature is shown in the display.
6. The new value for the colour temperature is accepted by the unit, saved and shown in the
display.
Selection button
Hue / Saturation
Multifunctional
push dial
(selection wheel)
ON/OFF switch
Colour temperature
selection button
33