Attaching The Battery To The Monitor; Menu Setting; F1~F2 User-Definable Function Buttons; Dial - Walimex Pro 22020 Gebrauchsanleitung

NOTE
After use disconnect the device from the local power supply by simply pulling out
the mains plug.

7. Attaching the battery to the monitor

• Slide the battery plate on the rear of the device into the guide and attachment
rail. (depending on the model)
• Insert the correct battery into the battery plate into it clicks into place.
• Removing the battery: Press the unlock button on the side and pull the battery
out of the compartment.
7.1 Using the power supply unit (optional) DC 12 V:
• Insert the cable plug into the power supply unit of the device.
• Then connect the power supply unit to the mains. Note: Only connect the
device to an earthed socket.
NOTE
Compare the local power supply with the connected load of the device. If the
values differ, please contact info@walser.de.
1. First slide the switch to left, then place battery plate into the slot.
2. Then slide the battery plate down into the slot and slide the switch back to the right.
The battery plate model F970 is suitible for NP-F compatible batteries as used in
e.g. the following Sony DV cameras:
24
DV Battery Mount Plate Specification
Model F970 for battery of SONY DV:
DCR-TRV series, DCR-TRV E series, VX2100E PD P series, GV-A700, GV-D800,
FD/CCD-SC/TR3/FX1E/HVR-AIC, HDR-FX1000E, HVR-Z1C, HVR-V1C, FX7E.

8. Menu Setting

Before setting the functions, please make sure the device is connected correctly.
8.1 F1~F2 User-definable function buttons
Select „MENU -- SYSTEM -- F1 Configuration/F2 Configuration" to custom F1 / F2
shortcut settings. Then left or right sliding the dial to choose options.
Press to confirm option as default, then press EXIT to exit.
Functions of F1-F2 buttons can also be customized: Center Marker, Aspect Marker,
Underscan, Scan, Aspect, DSLR, Freeze, H/V Delay, Peaking, False Color, Expo-
sure, Histogram, Level Meter.
F1-F2: 2 user-definable function buttons
Default function:
F1: Peaking F2: Level Meter

8.2 Dial

Sliding the dial to activate the brightness bar when not under the menu display
Slide the dial to adjust the value of option directly.
Press "EXIT" to exit if accidentally enter the menu.
After enter the Volume menu, press the dial to select among of Brightness, Cont-
rast, Saturation, Tint, Sharpness, Volume, and Exit.
F 970
25