Honeywell Edge Bedienungsanleitung Seite 13

• Avoid any corrosive, overheated or refrigerated atmosphere.
KARABINER
Connector in conformity to standard EN 362.
• When the karabiner is used to attach to an anchorage point, the recommendations of the para-
graph "ANCHORAGE POINT" are respected.
It is also possible to use a strap ring (EN 795) or a line clamp (EN 362) in order to connect to the
anchorage point. All scaffold and other karabiner hooks conform to EN 362. The scaffold hook is
made from aluminium with stainless steel closing latches and has gate opening of 63mm. The
minimum breaking load is > 20kN. The removable karabiner may only be replaced with another
karabiner that conforms to EN 362. Please read the user guide for the karabiner.
WHEN CONNECTING THE KARABINER, CHECK THAT THE LOCKING SYSTEM IS IN
WARNING:
The karabiner is essential to your safety. Therefore, we recommend the following:
• Assign the connector to one specific person whenever possible,
• Before each use, check that there is no warping or any signs of wear and that the locking sys-
tem works properly.
• Do not attach and remove the device several times during the day if it features a manual lock.
IF THE KARABINER HAS BEEN USED TO STOP A FALL, FOR SAFETY REASONS, IT IS ES-
SENTIAL TO RETURN IT FOR VERIFICATION.
TRANSPORT
During transport, make sure that your PPE is stored in a cool, dry, noncorrosive atmosphere, away
from ultraviolet light etc. ...
POSITION.
13