Baumer CombiLyz AFI4 Betriebsanleitung Seite 13

Select conductivity range.
f
Menu
AFIx menu
If desired, select or define further settings:
f
Concentration output
„
Display colors
„
Warnings
„
Relays
„
8.2 Configuration via FlexProgram
9 FlexProgrammer 9701 is connected.
Configuration options with the AFIx transmitter:
Select HART or IO-Link mode
„
Configure switch output
„
Configure temperature compensation
„
Select temperature source for compensation
„
Select conductivity range
„
Set current limits
„
Select concentration output
„
Configure media screen
„
Make a data logging
„
Calibrate sensor and media
„
Configuration options with the DFON display:
Select screen layout
„
Select backlight intensity
„
Define relays
„
Define warning and error indication
„
For further information, refer to the HELP menu in FlexProgram.
8.3 Configuration via IO-LINK Master
Switch setup, conductivity ranges, output mode etc. can be configured via IO-Link with an IO-Link Master.
Note: The sensor may not be connected directly to a class B master.
Connect IO-Link Master to sensor.
f
Connect IO-Link to PC.
f
Set parameters.
f
For a detailed description of the parameter and process data for the IODD, refer to the AFI4/AFI5 product
page at www.baumer.com.
www.baumer.com
Input con g. Conductivity ranges
Operating Instructions
Conductivity measurement
CombiLyz AFI4/AFI5
Inductive conductivity transmitter
Conductivity range 1
Conductivity range 2
Conductivity range 3
Conductivity range 4
Select range
Select range
Select range
Select range
13 / 68