Geberit ESG 3 Betriebsanleitung Seite 50

EN
Malfunction
<Ready for welding>
LED display
flashes, and
<Malfunction>
lights up.
<Malfunction> LED
display
<Mains connection>,
<Ready for welding>
and
<Welding complete>
LED displays
light up, and
<Malfunction> LED
display
1) The addresses of authorised repair shops can be requested from Geberit
sales companies.
50
Cause
Too many serial
welding joints.
Electrofusion
flashes. tool is defective.
Worn coupling
connection
plugs or too
many inter-
ruptions from
removing the
coupling
connection
plugs during
welding
flashes.
procedure.
Rectification
▶ Reduce the number of
welding joints (see
page 393)
▶ Send the electrofusion
tool to an authorised
1)
repair shop
▶ Disconnect the mains
plug.
▶ Visually inspect the
coupling connection
plugs and coupling
connection cables if
necessary, or replace
the connecting cables.
▶ Send the electrofusion
tool to an authorised
1)
repair shop
9962820747 © 01-2023
966.473.00.0(03)
i ,
.
.