Geberit ESG 3 Betriebsanleitung Seite 47

Troubleshooting
If the <Malfunction> LED display
LED display
process has been aborted prematurely because of a malfunction.
Malfunction
<Malfunction>
and
<Mains connection>
LED displays
up.
9962820747 © 01-2023
966.473.00.0(03)
plus another LED display light up, the welding
Cause
Mains voltage
too low.
light
Mains voltage
too high.
lights up or the <Malfunction>
Rectification
▶ Switch off any non-
essential consumers.
▶ Use a power generator
with the correct output
voltage (see
"Operation with power
generator" chapter)
▶ For mains operation,
disconnect the mains
plug and contact your
power supplier.
▶ When using a power
generator, ensure the
output voltage is
correct.
EN
47