General Information - Geberit ESG 3 Betriebsanleitung

General information

Note on this document
The original instructions were written in German. All other language
versions are translations of the original instructions.
Basic safety notes
Intended use
The Geberit ESG 3 electrofusion tool may only be
used for welding:
• Geberit ø 40–160 mm electrofusion couplings
with Geberit PE and Geberit Silent‑db20 pipes
and fittings
• Geberit electrofusion tapes for anchor point
ø 50–315 mm with Geberit PE pipes and fittings
• Geberit ø 200–315 mm electrofusion coupling
with integrated thermal fuse with Geberit PE
pipes and fittings
Any other use or use extending beyond this is
deemed to be improper. Geberit will not accept
any liability for any resulting damage.
The Geberit ESG 3 electrofusion tool may only be
connected to a public power supply system with
the approval of the power supplier.
9962820747 © 01-2023
966.473.00.0(03)
EN
29