Bergstrom SLIMFIT RENAULT T High Sleeper Cab Diagnose Bei Ausfällen Seite 23

SLIMFIT
• Replace compressor 2.
• Correctly connect the module of compressor 2 or replace (to access the modules and
the compressors, remove the unit's external cover). Note: the references for each
module are different; check that it is replaced using the correct reference.
!
(If the error persists, contact the Authorised Technical Service).
• Replace compressor 1.
• Correctly connect the module of compressor 1 or replace (to access the modules and
the compressors, remove the unit's external cover). Note: the references for each
module are different; check that it is replaced using the correct reference.
!
(If the error persists, contact the Authorised Technical Service).
• Check and correct possible bad contacts, breakages or disconnection the LIN cable of
compressor 1.
• Correctly connect the module of compressor 1 or replace (to access the modules and
the compressors, remove the unit's external cover). Note: the references for each
module are different; check that it is replaced using the correct reference.
!
(If the error persists, contact the Authorised Technical Service).
Solution
23
EN