Bergstrom SLIMFIT RENAULT T High Sleeper Cab Montageanweisungen Seite 21

SLIMFIT
10 Check that the mounts are properly
supported in the front and back and that there
is no wiring which can be crushed. Tighten
the M8 nuts until the mounts come up against
the base hexagons.
10
Hexagon L=22 (M8)
Upholstery
Fastening mount
Position the console on the interior air
11
distribution panel and secure with (4)
6/100x10 Phillips head screws and (4) Ø6
wide-rimmed flat washers on hexagons.
Hexagon L=18
10
Hexagon L=17 (M8)
Interior air
distribution panel
21
30x25 EPDM Seal
Cabin roof
Hexagon L=24 M6
EN