Bergstrom SLIMFIT RENAULT T High Sleeper Cab Montageanweisungen Seite 18

SLIMFIT
EN
Position the unit on the hatch gap, introducing
5
the guides in the boreholes (always with
authorisation from the client) of the cabin.
Caution: If the unit is stuck in the spoiler,
release it by marking and making a cut.
5
5
6 Introduce the mounts on M8 studs
underneath the upholstery.
Caution: It is very important to remove the
hatch wiring clamps to ensure the wiring is
not crushed by the mounts.
5
6
18
5
5
6
6