Bergstrom SLIMFIT RENAULT T High Sleeper Cab Montageanweisungen Seite 16

SLIMFIT
EN
Any changes made to the spoiler must be authorised by the customer. In consequence,
!
Dirna Bergstrom shall be released from any liability deriving from modification of the
spoiler.
Take down the original console, pulling on
1
the end of the lights to access the fastening
screws.
If LEDs are fitted (*), pull on them to remove.
1
Take down the hatch by removing the
2
fastening screws (disconnect wire clamp (*) in
electrical hatch).
2
1
2
16
1
*