Welding Torch Variants; Available Welding Torch Variants - Fronius TTB 80 G Bedienungsanleitung

Welding torch variants

Available welding
torch variants
(1)
(2)
(3)
(4)
38
Standard interface
Pushing the button backward:
a) If high frequency ignition (HF ignition) is activated at the power source, the
ignition process is activated
b) When contact ignition is activated on the power source, the welding voltage
is applied to the tungsten electrode. The welding process starts when the
torch contacts the workpiece
Pushing the button forward during welding:
a) When welding in 4-step mode, intermediate lowering is activated by pushing
the button forward and holding it in place. This function is only available if
the lowering current I
Potentiometer interface
Pressing the Start button:
a) If high frequency ignition (HF ignition) is activated at the power source, the
ignition process is activated
b) When contact ignition is activated on the power source, the welding voltage
is applied to the tungsten electrode. The welding process starts when the
torch contacts the workpiece
Potentiometer:
a) For adjusting the welding current
Without torch trigger
Standard interface with torch trigger extension
Pushing the button backward:
has been set on the power source
2