Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The next step is to install the EFOY fuel cell. Proceed as follows:
Ensure the correct orientation of the fuel cell on the mounting plate.
When attaching the EFOY fuel cell to the mounting plate, make sure that the
fuel cell is standing straight on the plate and tighten the belt when closing it
to prevent the EFOY from slipping on the plate.
Reinstall the mounting plate including the EFOY fuel cell into the ProCube: Make
sure it is positioned correctly. At the same time, make sure that the waste heat
flange is pushed onto the EFOY fuel cell.
Then screw the two knurled nuts back on to fix the mounting plate in the ProCube.
Unscrew the cap of the EFOY fuel manager.
Screw the tank connection of the EFOY fuel cell onto the EFOY Fuel Manager.
Page 62
Loosen the two knurled nuts and
remove the mounting plate from the
ProCube.
Attach the EFOY fuel cell to the
mounting plate: to do this, open the
belt of the EFOY, thread it through
the openings on the side of the
mounting plate and then close it
again.
Commissioning
Werbung
